Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »

Overview

The MyPay Time features offer the ability to create specific settings for Time Entry. The easy-to-use interface allows a unique set-and-forget configuration sets specific to your organisation and/or Employees.

1. Default Configuration

You can use MyPay Time features without configuring any option. The following are the parameters used:

  • Period Start Day: Monday

  • Period Length: 7

  • Time increments: 1

  • Allow Project Tasks
  • Allow Memo

  • Allow Service Items

  • Allow Pay Items

2. Overriding the Default Configuration

As a MyPay Admin, you can easily override the above default configuration by creating a New Time Configuration. Time configurations can be applied in two ways (see below).
To create a new Time Configuration, follow these steps:


I. Log into MyPay using ADMIN user (see the Administration menu across the menu bar)

II. As an ADMIN on the main menu bar, choose: Administration

III. On the left menu bar, choose: Time & Allowance → Configuration and click Create


IV. Set the configuration fields as follows:

1. Name: Enter a descriptive name for this time configuration (* mandatory field)

2. Period Start Day: Select the day of the week that time entries commence.  (* mandatory field)

3. Period Start Date: Select the date this configuration will start from  (* mandatory field)

4. Close Date: Select the date this configuration ends at

5. Enabled Fields: Select fields to show in the Timesheet (Right side of the List contains active fields)

6. Column Count: Select how many columns to use in the Timesheet  (* mandatory field)

7. Notifications: check/uncheck to suppress notifications 

8. Start/End on period entry: check/uncheck to enter daily Start and Finish times and have the system calculate hours/minutes

9. Service Items Mandatory: check (mandatory) or uncheck (optional). 

10. Pay Items Mandatory: check/uncheck to enforce Pay Component Sub Type list

11. Related Records Mandatory: check/uncheck to enforce related records

12. Memo Mandatory: check/uncheck to enforce time entry description 

13. Only Clock in Allowed: check/uncheck to disable timesheet and allow only clock in option

14. Enable Geo Location: check/uncheck to enable Geo Location feature. Captures coordinates via user's browser. Does not integrate to NetSuite. 

15. Period Length: Max 14 - NetSuite supports 7 day timesheet period. To enable this field please contact support@infinetcloud.com

16. Time Increments: Set desired rate  (* mandatory field)

17. Enable Quick Time Entry: check/uncheck to enable Quick Time Entry feature.

18. Clock/timer reminder (hours, 0 to disable): Set a time period after which the app sends a reminder with information that Clock/ timer is still running!

19. : Set a time period after which the app auto-terminates the Clock/timer.

20. Clock/timer timeout notify also approver: check/uncheck to enable sending an email notification to the approver about auto-terminated time entry

21. Active: enable this time configuration

Make sure to save all your settings.

To make fields 9 - 14 clickable. They must be enabled first. To do that, move all required fields from the left to the right side of the list of Enabled Fields. Then you can save the changes.

Page Contents

Subsidiary Specific Time Configuration

When one or more Time Configurations exist, a configuration can be applied at the subsidiary level. This means that all employees within the Subsidiary will have the assigned Configuration applied. To to do this, follow these steps:

  1. As an ADMIN on the main menu bar, choose: Administration
  2. On the left menu bar, choose: Lists → Subsidiaries → Subsidiaries  and click Create
  3. Click the relevant Subsidiary
  4. Click Edit
  5. Select the Time Configuration you wish to link to the Subsidiary
  6. Save changes

Employee Specific Time Configuration

You can also assign a Time Configuration at the more granular Employee level. To do this, follow these steps for each applicable Employee:

  1. As an ADMIN on the main menu bar, choose: Administration → Employees
  2. Click the relevant Employee
  3. On the left menu bar, choose: Configuration
  4. Click Edit
  5. Select the Time Configuration you wish to link to the Employee
  6. Save changes

  • No labels